Performance Capabilities of Single Cartridge Seals S22
- Temperature: -40℃ to 220℃, dependent on the elastomer
- Pressure: Up to 25 bar
- Speed: Up to 25 m/s
- End play/axial float allowance ±1.0mm
Sizes of Single Cartridge Seals S22
25mm to 75mm
1” to 2.625”
Materials Combination of Single Cartridge Seals S22
- Face: Carbon, SiC, TC
- Seat: SiC, TC
- O-rings: NBR, EPDM, VITON, Aflas, FEP, Kalrez, Chemraz etc.
- Spring: SS316, Hastelloy C
- Metal parts: SS316
Specification of Single Cartridge Seals S22
| Single Cartridge Seals by Size | d | D min | D max | D1 | D2 | C | E | L1 | L2 |
| S22-25 | 25 | 41.5 | 51 | 105 | 60 | 62 | 13.2 | 41 | 24.5 |
| S22-28 | 28 | 44.5 | 52 | 105 | 60 | 62 | 13.2 | 41.5 | 26.5 |
| S22-30 | 30 | 45.5 | 56 | 105 | 63 | 67 | 13.2 | 41.5 | 26.5 |
| S22-33 | 33 | 48 | 57 | 110 | 65 | 67 | 13.2 | 42 | 27.5 |
| S22-35 | 35 | 50.8 | 61.5 | 107 | 68 | 70 | 13.2 | 44 | 28.5 |
| S22-38 | 38 | 54.5 | 66 | 123 | 73 | 75 | 14.7 | 44 | 28.5 |
| S22-40 | 40 | 57.5 | 68 | 123 | 75 | 77 | 14.7 | 44.5 | 31 |
| S22-43 | 43 | 59.5 | 70.5 | 133 | 78 | 80 | 14.7 | 44.5 | 32 |
| S22-45 | 45 | 63 | 73 | 130 | 79 | 82 | 14.2 | 44.5 | 32 |
| S22-48 | 48 | 65 | 75 | 130 | 82 | 84 | 14.2 | 45 | 33 |
| S22-50 | 50 | 58 | 78 | 148 | 85 | 87 | 14.7 | 47 | 33.5 |
| S22-53 | 53 | 70 | 87 | 148 | 95 | 97 | 17.5 | 47 | 34.5 |
| S22-55 | 55 | 73 | 83 | 148 | 90 | 92 | 17.5 | 47 | 36.5 |
| S22-60 | 60 | 79 | 91 | 157 | 100 | 102 | 17.5 | 47 | 38.5 |
| S22-65 | 65 | 85.7 | 98.5 | 162 | 108 | 110 | 17.5 | 48.5 | 39.5 |
| S22-70 | 70 | 94 | 108 | 178 | 116 | 118 | 17.5 | 48.5 | 43.5 |
| S22-75 | 75 | 98.4 | 118 | 190 | 125 | 127 | 17.5 | 49 | 44.5 |
| Single Cartridge Seals by Size | d | D min | D max | D1 | D2 | C | E | L1 | L2 |
| S22-1″ | 1 | 1.634 | 2 | 4.134 | 2.362 | 2.44 | 0.52 | 1.614 | 0.965 |
| S22-1.125″ | 1.125 | 1.75 | 2.05 | 4.134 | 2.362 | 2.441 | 0.52 | 1.634 | 1.043 |
| S22-1.25″ | 1.25 | 1.89 | 2.25 | 4.331 | 2.559 | 2.638 | 0.52 | 1.654 | 1.083 |
| S22-1.375″ | 1.375 | 2 | 2.42 | 4.213 | 2.677 | 2.756 | 0.52 | 1.732 | 1.122 |
| S22-1.5″ | 1.5 | 2.146 | 2.625 | 4.843 | 2.874 | 2.95 | 0.579 | 1.732 | 1.122 |
| S22-1.75″ | 1.75 | 2.48 | 2.812 | 5.118 | 3.11 | 3.23 | 0.559 | 1.752 | 1.26 |
| S22-1.875″ | 1.875 | 2.559 | 2.94 | 5.118 | 3.228 | 3.207 | 0.559 | 1.772 | 1.299 |
| S22-2″ | 2 | 2.677 | 3.19 | 5.827 | 3.346 | 3.43 | 0.579 | 1.85 | 1.319 |
| S22-2.125″ | 2.125 | 2.875 | 3.437 | 5.512 | 3.74 | 3.82 | 0.689 | 1.85 | 1.437 |
| S22-2.25″ | 2.25 | 2.992 | 3.56 | 6.181 | 3.78 | 3.858 | 0.689 | 1.85 | 1.437 |
| S22-2.375″ | 2.375 | 3.11 | 3.59 | 6.181 | 3.937 | 4.02 | 0.689 | 1.85 | 1.516 |
| S22-2.5″ | 2.5 | 3.287 | 3.8 | 6.693 | 4.173 | 4.252 | 0.689 | 1.909 | 1.555 |
| S22-2.625″ | 2.625 | 3.374 | 3.937 | 6.378 | 4.252 | 4.331 | 0.689 | 1.909 | 1.555 |
Design Drawing of Single Cartridge Seals S22
Reviews
There are no reviews yet.